1 1 2 0 0 PlotType CoastType ProjType FP Frame c:\smh\coast\gr&ic&ca.sva CoastLineFile 1847_1.scn PointFile1 {ErrFile1} gpsegi.pos1 PointFile2 {ErrFile2} coord_ylt.dec PointFile3 {ErrFile3} 1x1_1.ps OutputFile 10 -1 1 9 25 PointType1 PointRate1 SymRate1 Sym#1 SymSize1/BiColSc1/ELevel1 532001 0 60 0 LabelRate1/ColorSc1 LabelAngle1/Min1 LabelSize1/Max1 WeekDay1/AutoSc1 0.0 0.0 0.0 7 PointRGB1 LineW1 7 1 1 30 60 PointType2 PointRate2 SymRate2 Sym#2 SymSize2/BiColSc2/ELevel2 180 0 150 5 LabelRate2/ColorSc2 LabelAngle2/Min2 LabelSize2/Max2 WeekDay2/AutoSc/2 0.3 0.3 0.3 5 PointRGB2 LineW2 4 1 1 7 30 PointType3 PointRate3 SymRate3 Sym#3 SymSize3/BiColSc3/ELevel3 0 0 120 0 LabelRate3/ColorSc3 LabelAngle3/Min3 LabelSize3/Max3 WeekDay3/AutoSc3 0.0 0.0 0.0 10 PointRGB3 LineW3 82.51 82.512 -62.34 -62.32 .001 0.01 DLat DLon -62 ProjMerid 180 1 10 AnnFontSize EnvirW CoastW 0.0 0.0 0.0 EnvirRGB 0.0 0.0 0.0 CoastRGB 0.0 0.0 0.0 TextRGB 0 0.35 0.55 120 NTextLines TextPosX TextPosY TextFontSize #3 NRD-D2-D3-D4-D5-D6-LYR COMMENTS ! General: DON'T change the order of variables in this parameter file. use only blanks as punctation marks in data files, no commas PlotType: =1 if confined by latitude/longitude, =2 if confined by rectangle =3 confined by rectangle, may include North Pole if MaxLat>90, use ProjType=3 then CoastType =0 no coast line =1 if block header is BlockID NPos {optional inf} =2 - - -- - NPos {optional inf} Block header is followed by NPos positions, where each position is latitude longitude (decimal) ProjType =0 geographical coordinates scaled to mean latitude =1 transversal mercator, projection meridian in ProjMerid, from Snyder 1982 =2 home-made projection, especially for plotting in polar regions FP =0 the program choose portrait or landscape orientation to optimal fit A4 =1 force portrait orientation, fit to page =2 force landscape orientation, fit to page =3 force portrait, might exceed A4 =4 force landscape, might exceed A4 Frame =-1 no outer nor inner frame =0 no outer frame =1 outer frame, this can affect the bounding box if an encapsulated postscript are derived from the output file PointType =0 PointFile not used =1 PointFile format: GPSSec lat lon {add. inf}, Label is dec.hour based on GPSSec and WeekDay =2 PointFile format: number lat lon {add. inf} Label is integer part of 1. column =3 PointFile format: lat lon {add inf} Label is row number =4 intended for waypoint lists PointFile format: ID lat lon {p} if p is specifed in PointFile a line is drawn to the next point. PointRate, SymRate not active LabelRate has special function, see LabelRate =5 for airborne gravity spring tension setting (GRS80 + Eotvos) PointFile format: 4 lines header: apron basereading in CU apron gravity in mGal expected speed in m/s expected altitude in m followed by a data line for each waypoint each line being: ID lat lon {p} if p is specifed a line is drawn to the next point. expected absolute and differential spring tension settings plotted at waypoints PointRate, SymRate and LabelRate not active =6 PointFile format: number lat lon {add. inf} Label is 1. column with 1 decimal =7 PointFile format: number lat lon {add. inf} Label is 1. column with 2 decimals =8 PointFile format: number lat lon {add. inf} Label is 1. column with 3 decimals =10 PointFile format: number lat lon h {add. inf} data points plotted in color reflecting data column 0 (height). ColorSc, Min, Max and AutoSc controle color profile ColorSc: =1->color, =2->grey, =3 color for topography/bathymetry, =4 color for topo/bath/icecaps Min, Max: minimum and maximum value used for color profile scaling AutoSc: =1->auto scale color profile to data0 else use Min and Max =11 PointFile format: number lat lon h data1 {add. inf} data points plotted in color reflecting data column 1. ColorSc, Min, Max and AutoSc controle color profile, see PointType=10 =12 PointFile format: as for XING (RF format) (Dag Solheim's cross over adj. program) a block for each profile consisting of: block header: LineID #readings followed by a line for each reading: DataID lat lon h data1 (add. inf) line segments plotted with a color reflecting data1 ColorSc, Min, Max and AutoSc controle color profile, see PointType=10 =13 to be used instead of PointType=12 if there are data gaps in the separate profiles. =15 PointFile format: GRAVSOFT grid files, plot symbol at grid point ColorSc, Min, Max and AutoSc controle color profile, see PointType=10 =16 PointFile format: GRAVSOFT grid files, fill grid cell ColorSc, Min, Max and AutoSc controle color profile, see PointType=10 PointRate, SymRate, Sym#, PointRGB, LineW not active =17 as 16, but only values with associated error less than ELevel plotted ErrorFile name after PointFile =20 PointFile format: number lat lon h {add inf} data column 0 (h) plotted as histogram ortogonal to ground track in two colours (black/grey) SymSize, LabelRate, LabelAngle, LabelSize and Weekday controle bicolor data plotting LabelRate=0 or 1 -> direction, SymSize -> size of color scale Weekday: =1->auto scale bicolor profile to data0 else use LabelAngle and LabelSize LabelAngle,LabelSize: minimum and maximum value used for color profile scaling if WeekDay<>1 =21 PointFile format: number lat lon h data1 {add inf} data 1 plotted as histogram ortogonal to ground track in two colours (black/grey) See PointType=20 PointRate: every PointRate data point in PointFile is used, =n>0 a line is drawn between used data points in PointFile =n<0 no line is drawn Symrate: =0 no symbols at data points =n>0 a symbol for every n used data point SymNum =1,..,11 1=bullet 2=multiply 3=plus 4=asterisk 5=currency 6=circle, 7=filled circle, 8=square, 9=filled square, 10=diamond, 11=filled diamond SymNum 1 to 5 are characters (text), a small displacement of the point may occur SymNum 6 to 11 are graphic objects, use those if the location of the point is crucial SymSize =n>0 LabelRate: as for SymRate if PointType in [1,2,3,5,6,7,8] if PointType=4 (Waypoint list), then =0 no label =1 label is ID =2 label is ID Lat Lon ColorSC if PointType in [10,12,13,15,16,17] then =-1 or 1 for color scale, if =1 then plot the scale =-2 or 2 for grey scale =-3 or 3 color scale for bathymetry/topography =-4 or 4 color scale for bathymetry/topography/icecap LabelAngle deviation from horizontal in degrees LabelSize n>0 WeekDay =0,...,6 PointRGB =cR cG cB = Red Green Blue palette examples: 0.0 0.0 0.0 = black 0.x 0.x 0.x = grey scale 1.0 0.0 0.0 = clear red 0.0 1.0 0.0 = clear green 0.0 0.0 1.0 = clear blue LineW =n>0 thickness of line connecting data points MinLat MaxLat MinLon MaxLon DLat =r>0.0 equidistance between parallels, if r<=0.0 then no parallels DLon as for DLat ProjMerid -1800 font size for annotation EnvirW n>0 line width for parallels and meridians CoastW n>0 line width for coast line EnvirRGB color for parallels/meridians and annotation see PointRGB CoastRGB color for coast line, see PointRGB TextRGB color for text block, see PointRGB NTextLines n>=0 number of text lines following this line TextPosX 0.00 font size for text block