STEP to UG ! INFO- NX STEP AP203 - V5.0 ! INFO- ! INFO- Start of Translation: 7-APR-2008 10:29:53 AM ! INFO- ! STATUS- Converting Part: R:\local\ftp\pub\ASIM\Layout-Dr\iss\ASIM_skem-1April08.stp ! SUMMARY- ! SUMMARY- STEP Header Information ! SUMMARY- ! SUMMARY- Description TopDownASIMlayout ! SUMMARY- Imp_Level 2;1 ! SUMMARY- File_Name ASIM_skem-1April08 ! SUMMARY- Date 2008-04-01T11:46:58+02:00 ! SUMMARY- Author Josef P. ! SUMMARY- Organization DTU-SPACE ! SUMMARY- Pre_Version ST-DEVELOPER v11 ! SUMMARY- Orig_System UGS - NX 5.0 ! SUMMARY- Authorization Unknown ! SUMMARY- Schema_ID ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf ! SUMMARY- ! SUMMARY- Summary of STEP Entities ! SUMMARY- ! SUMMARY- Entity Type Count ! SUMMARY- ----------- ------ ! SUMMARY- advanced_brep_shape_representation .........................: 158 ! SUMMARY- advanced_face ..............................................: 7233 ! SUMMARY- application_context ........................................: 1 ! SUMMARY- application_protocol_definition ............................: 1 ! SUMMARY- approval ...................................................: 823 ! SUMMARY- approval_date_time .........................................: 823 ! SUMMARY- approval_person_organization ...............................: 823 ! SUMMARY- approval_role ..............................................: 823 ! SUMMARY- approval_status ............................................: 823 ! SUMMARY- axis2_placement_3d .........................................: 11386 ! SUMMARY- b_spline_curve_with_knots ..................................: 3203 ! SUMMARY- b_spline_surface_with_knots ................................: 1183 ! SUMMARY- brep_with_voids ............................................: 5 ! SUMMARY- calendar_date ..............................................: 1470 ! SUMMARY- cartesian_point ............................................: 115764 ! SUMMARY- cc_design_approval .........................................: 823 ! SUMMARY- cc_design_date_and_time_assignment .........................: 647 ! SUMMARY- cc_design_person_and_organization_assignment ...............: 999 ! SUMMARY- cc_design_security_classification ..........................: 471 ! SUMMARY- circle .....................................................: 5000 ! SUMMARY- closed_shell ...............................................: 174 ! SUMMARY- conical_surface ............................................: 88 ! SUMMARY- context_dependent_shape_representation .....................: 295 ! SUMMARY- conversion_based_unit_and_plane_angle_unit .................: 1 ! SUMMARY- coordinated_universal_time_offset ..........................: 1470 ! SUMMARY- cylindrical_surface ........................................: 2287 ! SUMMARY- date_and_time ..............................................: 1470 ! SUMMARY- date_time_role .............................................: 647 ! SUMMARY- design_context .............................................: 176 ! SUMMARY- dimensional_exponents ......................................: 1 ! SUMMARY- direction ..................................................: 33179 ! SUMMARY- edge_curve .................................................: 17644 ! SUMMARY- edge_loop ..................................................: 10324 ! SUMMARY- ellipse ....................................................: 44 ! SUMMARY- face_bound .................................................: 4695 ! SUMMARY- face_outer_bound ...........................................: 5629 ! SUMMARY- geometric_curve_set ........................................: 2 ! SUMMARY- geometric_representation_context_and_global_uncertainty_a ..: 176 ! SUMMARY- geometrically_bounded_wireframe_shape_representation .......: 2 ! SUMMARY- item_defined_transformation ................................: 295 ! SUMMARY- length_unit_and_si_unit ....................................: 1 ! SUMMARY- line .......................................................: 10403 ! SUMMARY- local_time .................................................: 1470 ! SUMMARY- manifold_solid_brep ........................................: 156 ! SUMMARY- manifold_surface_shape_representation ......................: 1 ! SUMMARY- mechanical_context .........................................: 176 ! SUMMARY- next_assembly_usage_occurrence .............................: 295 ! SUMMARY- open_shell .................................................: 1 ! SUMMARY- organization ...............................................: 1822 ! SUMMARY- oriented_closed_shell ......................................: 13 ! SUMMARY- oriented_edge ..............................................: 35284 ! SUMMARY- person .....................................................: 1 ! SUMMARY- person_and_organization ....................................: 1822 ! SUMMARY- person_and_organization_role ...............................: 999 ! SUMMARY- plane ......................................................: 3594 ! SUMMARY- plane_angle_measure_with_unit ..............................: 1 ! SUMMARY- plane_angle_unit_and_si_unit ...............................: 1 ! SUMMARY- product ....................................................: 176 ! SUMMARY- product_category ...........................................: 177 ! SUMMARY- product_category_relationship ..............................: 352 ! SUMMARY- product_definition .........................................: 176 ! SUMMARY- product_definition_formation_with_specified_source .........: 176 ! SUMMARY- product_definition_shape ...................................: 471 ! SUMMARY- product_related_product_category ...........................: 176 ! SUMMARY- representation_relationship_with_transformation_and_shape ..: 295 ! SUMMARY- security_classification ....................................: 471 ! SUMMARY- security_classification_level ..............................: 471 ! SUMMARY- shape_definition_representation ............................: 176 ! SUMMARY- shape_representation .......................................: 176 ! SUMMARY- shape_representation_relationship ..........................: 161 ! SUMMARY- shell_based_surface_model ..................................: 1 ! SUMMARY- si_unit_and_solid_angle_unit ...............................: 1 ! SUMMARY- spherical_surface ..........................................: 37 ! SUMMARY- surface_of_linear_extrusion ................................: 4 ! SUMMARY- toroidal_surface ...........................................: 40 ! SUMMARY- trimmed_curve ..............................................: 878 ! SUMMARY- uncertainty_measure_with_unit ..............................: 176 ! SUMMARY- vector .....................................................: 10407 ! SUMMARY- vertex_point ...............................................: 12413 ! SUMMARY- ------- ! SUMMARY- Total 314509 ! STATUS- ! STATUS- Converting to Output Form (Phase 2 of 3): 7-APR-2008 10:30:00 AM ! STATUS- ! STATUS- ! STATUS- Generating UG geometry and placing them in parts ! STATUS- ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:07 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25345 ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\sr400-001 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:09 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25490 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\fov2x40diam50 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:11 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 23202 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\PDU1 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:12 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 23203 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\SPLC1 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:13 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25494 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MXGS-Rad54x54 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:14 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25495 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MMIA-Nadir200x450Rad ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:16 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25496 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\SPLC270x400Rad ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:17 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25497 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\PDU190x410RAD ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:18 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25498 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MMIA-NADIRad1 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:19 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25499 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\CCD-RAD ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:21 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25500 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\Payload-ORU ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:22 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25346 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL1 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:26 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25347 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL2 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:29 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25348 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL3 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:31 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25349 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL4 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:33 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25350 ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL5 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:36 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25351 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL6 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:38 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 23199 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! WARNING- solid body contains fault: 13828 - RTSTSH: Inconsistent shells. ! WARNING- solid body (Unnamed) contains faults that could not be corrected ! WARNING- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL21 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:39 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 23200 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! WARNING- solid body contains fault: 13828 - RTSTSH: Inconsistent shells. ! WARNING- solid body (Unnamed) contains faults that could not be corrected ! WARNING- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL22 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:41 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25352 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL25 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:42 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25353 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL29 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:49 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25354 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL30 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:51 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25355 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL31 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:52 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25356 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL32 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:53 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25357 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL36 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:54 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25358 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL37 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:55 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25359 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL38 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:57 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25360 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL39 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:58 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25361 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL40 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:30:59 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25362 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL41 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:00 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25363 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL42 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:01 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25364 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL43 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:03 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25365 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL44 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:04 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25366 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL46 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:05 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25367 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL48 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:07 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25368 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL49 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:08 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25369 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL50 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:09 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25370 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL51 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:10 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25371 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL55 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:11 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25372 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL56 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:13 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25373 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL69 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:15 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25374 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL70 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:17 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25375 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL78 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:18 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25376 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL79 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:19 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25377 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL80 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:20 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25378 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL81 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:22 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25379 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL82 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:23 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25380 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL83 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:26 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25381 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL84 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:28 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25382 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL85 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:29 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25383 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL86 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:30 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25384 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL87 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:32 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25385 ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL88 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:33 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25386 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL89 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:34 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25387 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL90 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:36 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25388 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL91 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:37 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25389 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL92 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:38 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25390 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL93 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:39 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25391 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL94 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:41 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25392 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL95 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:42 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25393 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL96 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:43 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25394 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL97 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:44 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25395 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL98 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:45 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25396 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL99 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:47 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25397 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL100 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:48 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25398 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL101 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:49 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25399 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL102 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:50 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25400 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL103 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:51 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25401 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL104 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:52 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25402 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL105 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:54 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25403 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL106 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:55 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25404 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL107 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:56 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25405 ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL108 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:57 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25406 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL109 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:58 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25407 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL110 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:31:59 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25408 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL131 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:32:01 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25409 ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL151 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:32:03 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25410 ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL300 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:32:04 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25411 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL301 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:32:06 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25412 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL387 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:32:07 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25413 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL393 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:32:08 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25414 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL395 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:32:09 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25415 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL435 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:32:13 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25416 ! STATUS- ! INFO- Degeneracy in b-spline entity 125231 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 192.709781 1080.664778 -50.207240 ! INFO- Degeneracy in b-spline entity 125236 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 215.950829 1080.664777 -50.207240 ! INFO- Degeneracy in b-spline entity 125247 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 216.966800 1079.605051 -50.635449 ! INFO- Degeneracy in b-spline entity 125275 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 194.741800 1090.438041 -46.258112 ! INFO- Degeneracy in b-spline entity 125280 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 213.918800 1090.438031 -46.258115 ! INFO- Degeneracy in b-spline entity 125287 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 190.474571 1084.668290 -48.589522 ! INFO- Degeneracy in b-spline entity 125296 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 218.211419 1084.668290 -48.589522 ! INFO- Degeneracy in b-spline entity 125301 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 192.506600 1090.202584 -46.353254 ! INFO- Degeneracy in b-spline entity 125310 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 216.179400 1090.202575 -46.353258 ! INFO- Degeneracy in b-spline entity 125324 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 191.693800 1020.107489 136.269914 ! INFO- Degeneracy in b-spline entity 125328 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 216.966800 1020.107479 136.269910 ! INFO- Degeneracy in b-spline entity 125347 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 220.277231 1006.330740 130.703078 ! INFO- Degeneracy in b-spline entity 125357 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 192.709781 1007.272716 131.083707 ! INFO- Degeneracy in b-spline entity 125361 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 215.950829 1007.272716 131.083706 ! INFO- Degeneracy in b-spline entity 125501 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 192.506600 1009.509946 131.987715 ! INFO- Degeneracy in b-spline entity 125502 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 216.179400 1009.509956 131.987719 ! INFO- Degeneracy in b-spline entity 125505 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 218.211419 1015.044240 134.223983 ! INFO- Degeneracy in b-spline entity 125506 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 190.474571 1015.044240 134.223983 ! INFO- Degeneracy in b-spline entity 125509 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 194.741800 1009.274489 131.892573 ! INFO- Degeneracy in b-spline entity 125510 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 213.918800 1009.274499 131.892576 ! INFO- Degeneracy in b-spline entity 125513 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 188.408769 1006.330698 130.703155 ! INFO- Degeneracy in b-spline entity 125514 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 187.392798 1007.272683 131.083787 ! INFO- Degeneracy in b-spline entity 125515 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 218.465380 1013.219077 133.486574 ! INFO- Degeneracy in b-spline entity 125519 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 187.392798 1019.165470 135.889361 ! INFO- Degeneracy in b-spline entity 125521 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 215.950829 1019.047753 135.841701 ! INFO- Degeneracy in b-spline entity 125522 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 192.709781 1019.047753 135.841701 ! INFO- Degeneracy in b-spline entity 125525 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 215.950829 1092.439814 -45.449246 ! INFO- Degeneracy in b-spline entity 125526 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 192.709781 1092.439814 -45.449246 ! INFO- Degeneracy in b-spline entity 125529 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 220.277231 1093.381791 -45.068617 ! INFO- Degeneracy in b-spline entity 125530 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 188.408769 1093.381832 -45.068694 ! INFO- Degeneracy in b-spline entity 125533 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 187.392798 1092.439847 -45.449326 ! INFO- Degeneracy in b-spline entity 125534 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 218.465380 1086.493453 -47.852114 ! INFO- Degeneracy in b-spline entity 125538 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 187.392798 1080.547060 -50.254901 ! INFO- Degeneracy in b-spline entity 125540 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 191.693800 1079.605041 -50.635453 ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- fixing self-intersecting topology faults ! STATUS- ! STATUS- fixing inconsistent loop faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! WARNING- solid body contains fault: 13818 - RTSTVC: Vertex not on curve. ! WARNING- solid body contains fault: 13818 - RTSTVC: Vertex not on curve. ! WARNING- solid body contains fault: 13818 - RTSTVC: Vertex not on curve. ! WARNING- solid body contains fault: 13818 - RTSTVC: Vertex not on curve. ! WARNING- solid body contains fault: 13818 - RTSTVC: Vertex not on curve. ! WARNING- solid body contains fault: 13818 - RTSTVC: Vertex not on curve. ! WARNING- solid body (Unnamed) contains faults that could not be corrected ! WARNING- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL436 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:32:34 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25417 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- fixing self-intersecting topology faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL437 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:32:56 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25418 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL438 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:32:57 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25419 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL439 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:32:59 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25420 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL440 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:33:00 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25421 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL441 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:33:01 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25422 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- fixing self-intersecting topology faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL442 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:33:09 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25423 ! STATUS- ! INFO- Degeneracy in b-spline entity 126831 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 929.843200 1074.333701 -43.860497 ! INFO- Degeneracy in b-spline entity 126887 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 917.827949 970.127606 30.734000 ! INFO- Degeneracy in b-spline entity 126897 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 917.827807 1055.753528 -39.337618 ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- fixing self-intersecting topology faults ! STATUS- ! STATUS- fixing inconsistent loop faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! WARNING- solid body contains fault: 13821 - RTSTVT: Vertices touch. ! WARNING- solid body (Unnamed) contains faults that could not be corrected ! WARNING- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL443 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:33:21 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25424 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- fixing self-intersecting topology faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! WARNING- solid body contains fault: 13804 - RTSTSX: Self-intersecting topology. ! WARNING- solid body (Unnamed) contains faults that could not be corrected ! WARNING- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL444 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:33:37 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25425 ! STATUS- ! INFO- Degeneracy in b-spline entity 127454 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 903.909781 1080.664778 -50.207240 ! INFO- Degeneracy in b-spline entity 127459 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 927.150829 1080.664777 -50.207240 ! INFO- Degeneracy in b-spline entity 127464 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 902.893800 1079.605041 -50.635453 ! INFO- Degeneracy in b-spline entity 127496 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 927.150829 1092.439814 -45.449246 ! INFO- Degeneracy in b-spline entity 127503 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 905.941800 1090.438041 -46.258112 ! INFO- Degeneracy in b-spline entity 127508 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 925.118800 1090.438031 -46.258115 ! INFO- Degeneracy in b-spline entity 127515 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 901.674571 1084.668290 -48.589522 ! INFO- Degeneracy in b-spline entity 127524 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 929.411419 1084.668290 -48.589522 ! INFO- Degeneracy in b-spline entity 127529 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 903.706600 1090.202584 -46.353254 ! INFO- Degeneracy in b-spline entity 127538 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 927.379400 1090.202575 -46.353258 ! INFO- Degeneracy in b-spline entity 127552 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 902.893800 1020.107489 136.269914 ! INFO- Degeneracy in b-spline entity 127556 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 928.166800 1020.107479 136.269910 ! INFO- Degeneracy in b-spline entity 127575 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 931.477231 1006.330740 130.703078 ! INFO- Degeneracy in b-spline entity 127585 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 903.909781 1007.272716 131.083707 ! INFO- Degeneracy in b-spline entity 127589 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 927.150829 1007.272716 131.083706 ! INFO- Degeneracy in b-spline entity 127727 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 903.706600 1009.509946 131.987715 ! INFO- Degeneracy in b-spline entity 127728 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 927.379400 1009.509956 131.987719 ! INFO- Degeneracy in b-spline entity 127731 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 929.411419 1015.044240 134.223983 ! INFO- Degeneracy in b-spline entity 127732 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 901.674571 1015.044240 134.223983 ! INFO- Degeneracy in b-spline entity 127735 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 905.941800 1009.274489 131.892573 ! INFO- Degeneracy in b-spline entity 127736 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 925.118800 1009.274499 131.892576 ! INFO- Degeneracy in b-spline entity 127739 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 899.608769 1006.330698 130.703155 ! INFO- Degeneracy in b-spline entity 127740 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 898.592798 1007.272683 131.083787 ! INFO- Degeneracy in b-spline entity 127741 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 929.665380 1013.219077 133.486574 ! INFO- Degeneracy in b-spline entity 127745 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 898.592798 1019.165470 135.889361 ! INFO- Degeneracy in b-spline entity 127747 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 927.150829 1019.047753 135.841701 ! INFO- Degeneracy in b-spline entity 127748 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 903.909781 1019.047753 135.841701 ! INFO- Degeneracy in b-spline entity 127751 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 903.909781 1092.439814 -45.449246 ! INFO- Degeneracy in b-spline entity 127753 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 931.477231 1093.381791 -45.068617 ! INFO- Degeneracy in b-spline entity 127754 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 899.608769 1093.381832 -45.068694 ! INFO- Degeneracy in b-spline entity 127757 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 898.592798 1092.439847 -45.449326 ! INFO- Degeneracy in b-spline entity 127758 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 929.665380 1086.493453 -47.852114 ! INFO- Degeneracy in b-spline entity 127762 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 898.592798 1080.547060 -50.254901 ! INFO- Degeneracy in b-spline entity 127763 was corrected at or around these ! INFO- locations. A shape change has resulted: ! INFO- 928.166800 1079.605051 -50.635449 ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- fixing self-intersecting topology faults ! STATUS- ! STATUS- fixing inconsistent loop faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! WARNING- solid body contains fault: 13818 - RTSTVC: Vertex not on curve. ! WARNING- solid body contains fault: 13818 - RTSTVC: Vertex not on curve. ! WARNING- solid body contains fault: 13818 - RTSTVC: Vertex not on curve. ! WARNING- solid body contains fault: 13818 - RTSTVC: Vertex not on curve. ! WARNING- solid body contains fault: 13818 - RTSTVC: Vertex not on curve. ! WARNING- solid body contains fault: 13818 - RTSTVC: Vertex not on curve. ! WARNING- solid body (Unnamed) contains faults that could not be corrected ! WARNING- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL445 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:33:57 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25426 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL446 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:33:58 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25427 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL447 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:00 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25428 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL462 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:01 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25429 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL563 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:02 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25430 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL565 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:03 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25431 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL577 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:05 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25432 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL579 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:06 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25433 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL581 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:07 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25434 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL582 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:08 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25435 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL583 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:10 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25436 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL584 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:11 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25437 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL585 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:12 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25438 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL586 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:13 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25439 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL587 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:14 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25440 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL588 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:16 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25441 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL589 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:17 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25442 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL590 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:18 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25443 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL591 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:20 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25444 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL592 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:21 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25445 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL593 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:22 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25446 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL594 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:24 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25447 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL595 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:27 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25448 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- fixing self-intersecting topology faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! WARNING- solid body contains fault: 13804 - RTSTSX: Self-intersecting topology. ! WARNING- solid body (Unnamed) contains faults that could not be corrected ! WARNING- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL596 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:33 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25449 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL598 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:34 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25450 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL599 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:35 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25451 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL600 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:37 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25452 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL601 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:38 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25466 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MS3470-16_000 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:40 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25467 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MS3470-12 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:41 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25468 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MS3470-14 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:42 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25469 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MS3470-16 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:44 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25470 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MS3470-16_001 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:45 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25471 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MS3470-16_002 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:46 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25472 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MS3470-14_000 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:47 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25473 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MS3470-16_003 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:48 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25474 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MS3470-12_000 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:50 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25475 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\STEMPEL ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:51 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25476 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\STEMPEL_000 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:52 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25477 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\STEMPEL_001 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:54 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25478 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\CEPA-block-active ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:55 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25491 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- fixing self-intersecting topology faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! WARNING- solid body contains fault: 13804 - RTSTSX: Self-intersecting topology. ! WARNING- solid body (Unnamed) contains faults that could not be corrected ! WARNING- ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25492 ! STATUS- ! STATUS- fixing vertex off curve and/or edge reversed faults ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- fixing self-intersecting topology faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! WARNING- solid body contains fault: 13804 - RTSTSX: Self-intersecting topology. ! WARNING- solid body (Unnamed) contains faults that could not be corrected ! WARNING- ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25493 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\FOV-NY38x38MXGS ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 3 ! SUMMARY- ----- ! SUMMARY- Total 4 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:58 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25453 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL12 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:34:59 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25454 ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL13 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:00 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25455 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL14 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:02 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25456 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL15 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:03 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25457 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL16 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:04 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25458 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL7 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:05 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25459 ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL8 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:07 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25460 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL9 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:08 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 23201 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! WARNING- solid body contains fault: 13828 - RTSTSH: Inconsistent shells. ! WARNING- solid body (Unnamed) contains faults that could not be corrected ! WARNING- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL10 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:09 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25461 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL11 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:10 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25462 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL17 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:12 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25463 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL18 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:13 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25464 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL19 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:14 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25465 ! STATUS- ! STATUS- fixing vertex and/or edge off surface faults ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\_SOL20 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:16 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25485 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25486 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\mxgs-38x38detoktor ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 2 ! SUMMARY- ----- ! SUMMARY- Total 3 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:17 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25484 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MMIA_DPU ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:18 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25479 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\MMIA-front ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:19 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25480 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\photometer1 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:21 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25481 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\photometerbaffle ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:22 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25482 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\20gr-Optik ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:23 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25483 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\20gr-Baffle-Optik ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:27 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25487 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\80gr-Optik ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:29 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25488 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\80gr-Baffle ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:30 AM ! STATUS- ! STATUS- Creating UG solid body from Input Ent Id 25489 ! STATUS- ! STATUS- simplifying Bsplines to analytics ! STATUS- ! STATUS- converting tolerant edges into exact edges ! STATUS- ! STATUS- doing final check of body to report any faults ! STATUS- ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\80gr-photBaffl ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- Solid .......................: 1 ! SUMMARY- ----- ! SUMMARY- Total 2 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:31 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\fov-mxgs-ny ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 2 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 3 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:32 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\20gr-Optik+Baffle ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 2 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 3 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:33 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\20gr-photo+baffle ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 2 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 3 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:35 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\20gr-FrontEl+Opt+Bafl ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 5 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 6 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:36 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\Limb-MMIA ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 2 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 3 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:37 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\limb-package1 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 2 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 3 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:38 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\80gr-Phot+Baffl ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 2 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 3 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:40 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\80gr-Opt+Baffl ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 2 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 3 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:41 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\80gr-Front+Opt+Baffle ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 5 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 6 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:43 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\Nadir-MMIA ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 2 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 3 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:44 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\nadir-package1 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 2 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 3 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:45 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\STECKER P4 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 5 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 6 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:46 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\P1,2,7,9,11,12 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 5 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 6 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:47 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\STECKER P12 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 4 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 5 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:49 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\3561919+A+ACES+GPS+BOOM ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 90 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 91 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:50 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\asim2 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 4 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 5 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:52 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\3561919+A+ACES+GPS+BOOM23090 ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 139 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 140 ! STATUS- Creating the UG part (Phase 3 of 3): 7-APR-2008 10:35:54 AM ! INFO- Filing Part ..: R:\local\ftp\pub\ASIM\Layout-Dr\iss\ASIM_skem_1April08_stp.prt ! SUMMARY- ! SUMMARY- Summary of Unigraphics Part Entities ! SUMMARY- ! SUMMARY- Entities Processed Count ! SUMMARY- ------------------ ----- ! SUMMARY- Component ...................: 20 ! SUMMARY- Reference Set ...............: 1 ! SUMMARY- ----- ! SUMMARY- Total 21 ! INFO- ! INFO- Total number of solids input for this translation : 161 ! INFO- ! INFO- Number of solids created without body validation faults : 151 ! INFO- ! INFO- Number of solids created with body validation fault(s) : 10 ! INFO- ! INFO- Number of solids ending up as sheet bodies : 0 ! INFO- ! INFO- End of Translation: 7-APR-2008 10:35:57 AM ! INFO-